26
The control menu
By pressing
on the menu of “Control”, the display would enter the next
control menu tree.
Start Battery Test: this is one command that commands the UPS to carry out a
battery self-test.
Reset Fault status: when a fault occurs, UPS will stay in Fault mode and alarm until
acknowledged. To clear the alarm, enter the “Reset Fault status” menu to reset
the error status, the UPS will cease alarming and return to bypass mode. The
cause of the fault should be established and cleared prior to the ups being
returned to normal operation
Restore factory settings: all the settings will be returned to their factory defaults.
This can only be done while in Bypass mode.
Summary of Contents for C500
Page 10: ...2 2 Presentation Front panel ...
Page 13: ...5 Circuit diagram ...
