FibeAir® RFU-C
Installation Guide
Ceragon Proprietary and Confidential
Page 81 of 93
9.7
Installing an RFU-C
– SRAL Adaptor
List of Items
Item
Description
Quantity
1
RFU-C RADIO
1
2
RFU-C - SRAL Adapter Kit, as follows:
ADPT_RFU-C38-SRAL_ANT for 38 GHz (UBR320)
ADPT_RFU-C18_26-SRAL_ANT for 18-26 GHz (UBR220)
1
Required Tools
Automatic screwdriver with torque
Bit screwdriver head adaptor
Phillips screw head bits, size 2
6.0 mm offset hexagon key wrench
Procedure
1 Place the RFU-C on the antenna adapter, aligning the holes at the four
corners of the two units.
Note:
Make sure you align the units properly for the horizontal or
vertical direction. The letters H and V appear on both units,
for correct alignment.
2 Make sure the adapter O-ring is in place, as shown in the figure below.
3 Attach
the RFU-C to the adaptor by closing the four captive screws and four
washers
that are supplied, assembled, in the RFU-C, and tighten the screws.
