FibeAir® RFU-C
Installation Guide
Ceragon Proprietary and Confidential
Page 27 of 93
7.3
1+1 Direct Mount Installation
List of Items
Item Description
Quantity Remarks
1
RFU-C RADIO
2
4
RFU-C COUPLER KIT
1
5
RFU-C TWIST KIT
1
Required Tools
The following tools are required for the RFU-C installation:
Metric offset hexagon key wrench #6
Phillips #2 screwdriver
Metric offset hexagon key wrench #2.5 and #3
Procedure
In 1+1 direct mount installation, the RFU-C is attached to a coupler. To install
a RFU-C in a direct mount 1+1 configuration:
Notes:
For 15 and 18 GHz frequencies, two O-Rings are supplied in
the Twist kit and should be mounted in the twist grooves.
For 6 GHz frequency, a gasket is used instead of an O-Ring.
The gasket should be mounted between the twist and the
RFU-C Coupler kit.
1 Mount the twist to the coupler using the O-Ring and four screws supplied
in the Twist kit, and tighten the screws.
