FibeAir® RFU-C
Installation Guide
Ceragon Proprietary and Confidential
Page 72 of 93
9.4
Installing an RFU-C Adaptor to Ericsson Antennas
(RAU1 Radios)
List of Items
Item
Description
Quantity Remarks
1
RFU-C RADIO
1
2
RFU-C — Ericsson Adaptor Kit for RAU1, in
accordance with BOM
1
Required Tools
Automatic screwdriver with torque
Bit screwdriver head adaptor
Phillips screw head bits, size
2
6.0 mm Offset hexagon key wrench
Procedure
Important:
Do not remove the protective sticker from the radio.
9.4.1
Connecting the Adaptor Kit to the Ericsson Antenna
1 Before placing the coupling plate, verify that the O-Rings are placed
correctly in their sinks in the Ericsson antenna and in the interface on the
basic coupling plate.
2 Place the RFU-C-Ericsson Adapter Kit for RAU1 on the Ericsson antenna.
3 Tighten the three screws and spring washers supplied in the -C-Ericsson
Adapter Kit for RAU1, as shown in the figure below.
