Building Instructions for the Predator series eCCPM helicopter kits.
Building Instructions for the Predator series eCCPM helicopter kits.
Building Instructions for the Predator series eCCPM helicopter kits.
Building Instructions for the Predator series eCCPM helicopter kits.
Building Instructions for the Predator series eCCPM helicopter kits.
Introduction
Introduction
Introduction
Introduction
Introduction
Congratulations on your purchase of Century Helicopter Product's newest RC helicopter
model. The Predator eCCPM is the most anticipated and long awaited Century model helicop-
ter. The attention is well deserved as the Predator will be unmatched in affordability, quality
and performance. Compared to other 60 class models, pilots will be elated to find the Predator
is built to please. This kit will exceed your expectations for precision control at an affordable
price.
It is recommended that the Predator be equipped with high quality radio equipment that has 8
to 9 channels and a minimum of 5 points on the throttle and pitch curves. Servos used should
be quality coreless, ball bearing and having a minimum torque rating of 70 oz/in. The gyro and
its servo should be quality with a servo speed of 0.11sec/60
0
or faster.
Warning
Warning
Warning
Warning
Warning
This radio controlled model is not a toy! It is a precision machine requiring proper assembly
and setup to avoid accidents. It is the responsibility of the owner to operate this product in a
safe manner as it can inflict serious injury otherwise. It is recommended that if you are doubt
of your abilities, seek assistance from experienced radio control modelers and associations. As
manufacturer, we assume no liability for the use of this product.
Pre-assembly Information
Pre-assembly Information
Pre-assembly Information
Pre-assembly Information
Pre-assembly Information
Upon opening the kit, all the major component parts are bagged by relationship to the differ-
ent sections of the helicopter. Various assemblies have been pre-assembled only requiring the
final assembly and installation onto the particular part, screws and nuts required for each step
are packaged in the same bag as the parts. Be careful when opening each bag as not to lose
any hardware. Care has been taken in filling and packing of each bag however mistakes do
happen, if there is a parts shortage or missing hardware please contact us at:
Century Helicopter Products
523 Sinclair Frontage Road
Milpitas, CA 95035
Tel: 1-408-942-9525
www.centuryheli.com
