The main rotor grips will accept rotor blades that have a root
thickness that is from 12mm to 18mm and have a 5mm hole.
Carbon Rotortech and wooden Aerotech blades are designed
for 5mm blades bolts.
#HW6001 M5x35
Shoulder Socket
Screw x 2 & M5
Locknut x 2
Assemble the landing skids onto the struts, note the correct
direction is to have the struts sweep forward. Position the rear
strut at approximately 37mm from the end and secure the skid
with the M3 set screw. Leave the front loose for now.
#HI6122 Landing
Struts x 2
60/70 & SE
#HW6123 10mm
Landing Skids x 2
~ 1 1/2”
[37mm]
M3x4 Set
Screws x 4
Attach the landing gear frame to the mechanics with M3x8
socket screws and locknuts. Attach the landing gear with
M3x20 socket screws, M3x10 flat washers (against struts)
and locknuts, sliding the front skids into final position.
Secure the M3 set screws.
M3x20
Socket
Screws x 4
& M3x10
Flat Washers
M3x8 Socket Screws x 4
& M3 Locknuts x 8
Note
locknut
on top.
#HW6117
Landing
Gear Frame
#HI6122A Landing
Struts - Carbon x 2
#HW6123A 12mm
Landing Skids x 2
60/70 & SE
Max 90
Attach the landing gear frame to the mechanics with M3x8
socket screws and locknuts. Attach the landing gear with
M3x20 socket screws, M3x10 flat washers (against struts),
M3x9x4 spacers and M3 locknuts, sliding the front skids into
final position. Mark, scuff and bond the skids to the structs
with JB Weld.
The front tail transmission is assembled. Open and apply
locktight to the back edge of the bevel gear for added security.
#HI6060 Front Tail
Transmission
#HI6154
Torque Tube
Drive Coupler
& M4x5 Set
Screw
M5x10 Collar &
M3x5 Set Screw
#CNBB511 x 2
#HW3057 Tail
Bevel Gear &
M3x5 Set Screw
M5x7x2
Spacer x 4
#HW6059 Tail Transmission
Drive Shaft
26mm Threaded
Hex Spacers x 3
#HW6062
Tailboom 795mm
60/70 & SE
#HW6062A Tailboom 825mm
Max 90
#HW6063
Torque Drive Shaft
60/70 & SE
#HW6063A Torque Drive Shaft
Max 90
Insert the 26mm hex spacers into the transmission half.
#HW6192 Upper
Linkage Set (6 rods)
#HI6145 Ball Link Set
(26 long & 4 short)
61
13
62
64
63
65
66
