6
ENGLISH
.
ADSL or Cable modem
Broadband Router
Ethernet
Ethernet
Micro System
Micro System
PC (Media Server)
PC (Media Server)
Crossover
2. Starting Up
2.1 Setting up the equipment
2.1.1 Speakers
Connect the speakers to the outlet on the back of the device. Connect the right speaker to the outlet marked
R and the left speaker to the outlet marked L.
2.1.2 Power cord
1. Connect the power cord to a wall socket. Check that the voltage (V) which is shown in the marking label
on the back of the unit is the same as your local electrical outlet (120 V AC, 60 Hz). Get advice from the
retailer or at a place of service if it is not the same.
2. To turn the power off completely, unplug the unit from the wall socket. It is reccomended to unplug the
unit during strong thunder storms to protect the device.
2.1.3 Aerial
Connect the included wire aerial to the aerial connection on the back of the device.
2.2 Installing onto network (LAN)
Connect the device to an Internet connected router according to the picture. Use a standard network cable.
To connect the unit to a PC, see the picture above. When connected to a PC the unit can only play music that
is stored on the computer. A crossover network cable is required (not included).
Note!
When the device is connected to a PC you can only listen to music which is stored on the computer.
The computer must have special software installed. See section Media Server.
