Series VC-50 / SVC-50 / MVC-50 / LVC-50
49-MCVC50EN03
4
USER´S MANUAL
5. DISPLAY
The LED display will show a value and a unit to the right of the digits.
There are also three labels for TARE; GROSS weight and ZERO and for low battery,
Low battery symbol
Stability symbol
Item counting units
Weight control symbols
Units of weight
6. OPERATION
6.1.
MANUAL ZERO SETTING
Press
at any time in order to make a manual zero setting.. When zero is obtained, the display will show
the zero indicator.
The scales are provided with an automatic resetting function in order solve minor problems in weight
deviation or accumulation of materials on the platform. However, it may be necessary to press
in order to
reset the scales to zero if the display shows a small weight when the platform is empty.
6.2.
SETTING THE TARE
Set the scales to zero using
if necessary. The zero indicator will appear.
Place some packaging on the platform and a weight value will appear.
Press
to set the tare of the scales. The weight that appeared on the display is saved as the tare value
and that value is deducted from the display, which returns to zero. The “NET” indicator will be activated.
When a product is added, only the product weight will be shown. The scales may be tared for a second time
if another type of product is added to the first. Again, only the additional weight will be shown after the tare
has been set.
When the packaging is removed, a negative value will be shown. If the scales are tared before the packaging
is removed, this value will be the gross weight of the packaging plus all the product that was removed. the
zero indicator will also light up because the platform returns to the same situation as when
was pressed.
6.3. SAMPLE
WEIGHT
In order to determine the weight of a sample, first tare the packaging and then place the sample in the same
packaging. The display will show the weight and the unit of weight in current use.
888888
OK
HI
LO
GROSS
TARE
ZERO
g/pcs
oz %
tkglb