Series VC-50 / SVC-50 / MVC-50 / LVC-50
49-MCVC50EN03
USER´S MANUAL
3
Connect the load cell as indicated in the diagram below (7 pin air connector)
Pin 1
IN+
Pin 2
SENSE+
Pin 3
OUT+
Pin 4
OUT-
Pin 5
SENSE-
Pin 6
IN-
Pin 7
NOT USED
4. DESCRIPTION OF KEYPAD
DESCRIPTION
KEY
PRIMARY FUNCTION
SECONDARY FUNCTION
Manual zero setting.
Displays shows zero.
Sets parameters and other functions.
Sets the tare of the scales, saving the
current weight in the memory as the tare
value, subtracting the value of the tare
weight and displays the result. This result
represents the net weight. If a value is
entered using the keypad, the value will be
stored as the tare value.
Increases the active digit when a value is
set for a parameter or other function.
Press this key in the weighing mode to
change to item counting mode. In item
counting mode, this key changes to unit
weight, total weight and number of items.
Moves the active digit to the right when
setting a value for a parameter or other
function
It changes the unit of weight.
Moves the active digit to the left when
setting a value for a parameter or other
function.
This is used to select the scale function. If
the scales are in weighing mode, it will
select item count mode. If it is not in
weighing mode, it will return to this function.
Acts as a “clear” key when setting values
for a parameter or other function.
This is to send data to a PC or printer using
the optional RS-232 interface. It also adds
the accumulative memory value if the
accumulative function is not automatic.
When the scales are in parameter set-up
mode, press this key to return to normal
operation.
ON / OFF key.