
Series VC-50 / SVC-50 / MVC-50 / LVC-50
49-MCVC50EN03
8
USER´S MANUAL
Clock
Determines whether the clock is on or off
Clock off
Clock on: The VC-50 / SVC-50 / MVC-50 /
LVC-50 will display the clock after 5
minutes on stand-by.
Clock
switched off
Bl
This is for setting up the backlight. It can be
set to on, automatic or off.
EL on:
EL automatic:
EL off:
EL
automatic:
F4 off
Beep
This sets up the alarm mode:
1.
No sound.
2.
Beep within limits.
3.
Beep when out of limits.
F5 Prt
This activates the RS.232 print function
when
, is pressed, P Prt.
O continuous printing, P Cont.
Series: RS-232 connection with the RS-232
remote display.
After setting up the printing mode
(communication), the display shows "b
xxx". The mean transfer rate must then be
set-up. Use
to select
600/1200/2400/4800/9600bps and after
selecting the rate, press
to save.
P Prt
Prog
Pin
Access programming and calibration
menus by entering the correct password.
See section 12 Technical Configuration.
When the scales are set up to show the weight in other units of weight, the accumulation function is still
shown in kilograms