
Series VC-50 / SVC-50 / MVC-50 / LVC-50
49-MCVC50EN03
USER´S MANUAL
7
7. CONFIGURATION
The scales have 6 Configuration parameters that can be set-up by the user, and there is also a method for
entering calibration mode.
To set parameters, press
.
The display will show the first function "F0 H-L". Press
, to move through the other functions.
Press
to set-up the function. It may be necessary to use
or to set a value using
in order to move
the active digit and then to use
to increase a digit, followed by
in order to enter a value. Use
to
leave a parameter without modifying it.
For example, when the display shows “F0 H-L”, press
to begin.
The display will show “Set Lo”. Then press
to set the lower limit, or press
to go on to the next
parameter, "Set Hi" to set the upper limit.
After pressing
to set a limit, press
to change the flashing digit and then use
to increase the
flashing digit. Continue with the next digit and set the amounts as required.
When all the digits have been set, press
to save the value. The display will return to the parameter that
has just been set, e.g. “Set Lo”. Continue until you reach the next parameter, where required, or press
to
return to normal weighing mode.
CONFIGURATION OF THE FUNCTIONS MENU
FUNCTION
SUB-FUNCTIONN
DESCRIPTION
DEFAULT
VALUE
SEt Lo
Sets the lower limit value
000.000
F0 H-L
SEt HI
Sets the upper limit value
000.000
to CLr
Clears the accumulated memory without printing
results
to P-C
Prints total accumulated memory and then
deletes the memory
F1 toL
to Prt
Prints accumulated total but does not delete the
memory.
F2 u nt
This determines the unit of weight that
appears on the display. Select kg, g, Lb,
etc.
kilogram, kg
SEt dA
Sets the date
. The display will show the last
date set 00.01.01.
Enter the new date in the
following format: yy.mm.dd
F3 tI
SEt tI
Sets the time. The display will show the current
time. Enter a new time in the following format
hh.mm.ss