Cellink BIO X 3D Bioprinter, User Manual

Page: 47 / 75

47
Printhead movement test
Thanks to this tab you can test the movement of the printheads along the 3 axis (x,y,z)
before printing.
4.4 Utilities
4
5
6
1 2 3
1. Printhead 1 - test movement for printhead 1.
2. Printhead 2 - test movement for printhead 2.
3. Printhead 3 - test movement for printhead 3.
4. Z axis command - controls the position of the printbed along the z axis.
5. X,Y axis command - controls the position of the printeads and the surface
along the x and y axis.
6. Home command - home the printheads.