Cellink BIO X 3D Bioprinter, User Manual

Page: 26 / 75

26
4.2 Bioprinting from a 3D model
Printheads and printbed
In the next step the printheads and printbed are to be configured. Depending on
which printheads are chosen, different settings are required (explained in detail in the
printhead’s separate manual). BIO X can bioprint using three different printheads
during the same bioprint. The properties of the bioink in each printhead are also to be
inserted or imported in this step.
2
1
3 4 5
1. Navigation bar – Use this to toggle between the settings for the different
printheads and the printbed.
2. Toggle printhead – Tap to select if you want to use the printhead or not.
If you select to use the printhead further settings will appear.
3. Bioink profile – Select the bioink profile you want to use. BIO X comes
preloaded with profiles for all CELLINK’s bioinks.
4. Printhead type – Select the type of printhead you want to use. Different
settings will appear below depending on what type of printhead you
select. BIO X comes preloaded with profiles for all CELLINK’s intelligent
printheads.
5. Photo curing – Toggle whether to use UV to crosslink the model. If
selected further options will appear.