www.cellarcool.com | Page 15
CM2500
MOUNTING THE EVAPORATOR UNIT
MOUNTING BRACKET
NOTE: You are REQUIRED to use only the mounting locations provided. These locations
ensure that the installer will not drill into any copper or electrical wiring within the system.
2. Controller & bottle probe wiring
1. Power cable wiring
3. Line set
4. Drain line
Routed Items:
NOTE: If installing the unit without attic access, perform steps 5-24 prior to steps 3-4.
3.
Secure the mounting bracket to the unit using the twelve (12) supplied 3/8” Phillips pan-head screws.
4.
Secure the unit’s mounting bracket to the opening using the twelve (12) supplied 21/2” Phillips-head screws.
