www.cellarcool.com | Page 23
CM2500
WALL MOUNT BRACKET INSTALLATION
1. Place the bracket on the wall. Use a level to ensure that the bracket is level. Using a pencil, mark the four screw
holes in the rear of the bracket.
REMOTE DISPLAY: INSTALLATION AND CONFIGURATION
NOTE: Cut hole in the location shown for routing the display cable.
Tools needed: 5/16” drill bit, 3/16” drill bit, drywall saw, level, pencil
What’s included: Display panel, wall mount bracket, flush mount bracket, flush mount template
55
°
F
Display panel
Wall mount bracket
Flush mount bracket
TOP
Flush mount template
