Ceiec Electric PMC-630 E, User Manual

Page: 62 / 87

62
Ceiec Electric Technology
+8 RW Trigger 1
2
UINT16 0 to 21 (Default=1)
+9 RW Trigger 2
2
UINT16 0 to 21 (Default=2)
* Default
Table 5-16 Setpoint Setup Register Structure
Notes:
1) “ Parameter ” specifies the parameter to be monitored. Table 5-17 below provides a list of
Setpoint Parameters.
Key Parameter Scale/Unit
1 VLN x100, V
2 VLL x100, V
3 I x1000, A
4 I4 x1000, A
5 Freq x100, Hz
6 ∑kW kW
7 ∑kvar kvar
8 P.F. x1000
9 DI1
1) For Over Setpoint, the Active Limit is DI Close
( DI=1 ), and Inactive Limit is DI Open ( DI=0 );
2) For Under Setpoint, the Active Limit is DI Open
( DI=0 ), and Inactive Limit is DI Close ( DI=1 );
10 DI2
11 DI3
12 DI4
13 DI5
14 DI6
15 Reserved /
16 ∑kW Demand kW
17 ∑kvar Demand kvar
18 P.F. Demand x1000
19 V THD x10000
20 V TOHD x10000
21 V TEHD x10000
22 I THD x10000
23 I TOHD x10000
22 I TEHD x10000
25 Voltage Unbalance x1000
26 Current Unbalance x1000
Table 5-17 Setpoint Parameters
2) “ Trigger ” specifies what action the setpoint will take when it becomes active. Table 5-18
below provides a list of Setpoint Triggers.
Key Action Key Action
0 None 11 DR #8
1 RO1 12 DR #9
2 RO2 13 DR #10