60
Ceiec Electric Technology
2)
Self-Read Time is applied to Peak Demand Log and Max/Min Log.
There are two types of Self-Read Time. The value 0 indicates that the transfer will happen
at 00:00 of the first day of every month. A non-zero value indicates that the transfer will
happen at a specific time based on the formula [Hour+Day*100] where 0≤Hour≤23 and
1≤Day≤28. For example, the value 1512 means that the Peak Demand of Current Month
will be transferred to the Peak Demand of Last Month register at 12:00pm on the 15
th
day
of each month.
3)
The Transient Capture function triggers WFR1 by default. It is highly recommended that
WFR2 be used for other Waveform Recording functions.
4)
The Backlight Time-out can be set from 0 to 60 minutes. A zero (0) value indicates that the
backlight time-out is disabled.
5.2.2 Clear/Reset Register
Register
Property
Description
Format
Note
6400
WO
Manual WFR Log #1 Trigger
UINT16
Writing ”0xFF00”
triggers the respective
Waveform Recorder
6401
WO
Manual WFR Log #2 Trigger
UINT16
6402
WO
Clear DR #1 (Standard)
UINT16
Writing “0xFF00” to the
register clears the
respective DR Log
6403
WO
Clear DR #2 (Standard)
UINT16
6404
WO
Clear DR #3 (Standard)
UINT16
6405
WO
Clear DR #4 (Standard)
UINT16
6406
WO
Clear DR #5 (Standard)
UINT16
……
WO
……
UINT16
6416
WO
Clear DR #15 (Standard)
UINT16
6417
WO
Clear DR #16 (Standard)
UINT16
6418
WO
Clear WFR Log #1
UINT16
Writing “0xFF00” to the
register clears the
respective WFR Log
6419
WO
Clear WFR Log #2
UINT16
6420
WO
Clear Energy Log
UINT16
Writing “0xFF00” to the
register clears the
Energy Log
6421
Reserved
6422
WO
Clear SOE Log
UINT16
Writing “0xFF00” to the
register clears the SOE
Log
6423
WO
Clear Energy
UINT16
Writing “0xFF00” to the
register clears all energy
registers
6424
WO
Clear Max/Min Log of This Month
UINT16
Writing “0xFF00” to the
register clears the
Max/Min Log of This
Month
6425
WO
Clear Peak Demand Log of This
Month
UINT16
Writing”0XFF00” to the
register clears the Peak
