FI002K0018v1530hUK – THS/21 Instruction manual for installation, use and maintenance
5
MAINTENANCE
ORIGINAL
INSTRUCTION 199
Warning Message
Cause
Action
DEFAULT not
modifiable
Inhibited attempt to modification of a
detection or ejection parameter of
the DEFAULT product
Select a different Product or create a new one.
5.7 Uninstallation
procedure
5.7.1 Disassembly
Disconnect any power source from the device, before performing any operation.
Uninstall the Probe and the Power Supply Box from the production line and place them apart.
5.7.2 Packing
5.7.2.1 Probes
Place the Probe on the wooden base.
Place the manuals inside the tunnel and fix the
Probe to the wooden base with the plastic
straps as shown in the figure. Remember to
protect the Probe surface, on top, with card
strips.
Position the Power Supply Box on top
of the Probe, placing the cable around
the base.
Refit the package to the wooden base.
Fill the empty space around and on top of the
Power Supply Box and close the package.
Close the package with plastic straps.
