10. To find the IP address of T2S ETH card IP Scanner tools can be used.
11. Refer section 9.2, page 57 for more information.
12. If you have not DHCP Disable DHCP.
13. Configure Network
14. If your Trap receiver is a server with host name then configure DNS if you want your trap to be received.
9.1.4.3 SNMP V1 agent configuration
1. Once your network is ready, you can configure the SNMP server, and the TRAP
2. Click on button “
Parameters
” at the end of the page
3. Go inside “
Monitoring
” menu
4. Click on “
SNMP
” sub menu
5. As mentioned earlier T2S ETH standalone card only supports SNMP V1 configuration, here you can only select
SNMP V1, ignore SNMP V2C and SNMP V3 in the drop down list. These Configurations will not communicate with
T2S ETH card.
6. SNMP Port is configurable through
Expert login
7. SNMP Port number is standard port 161 for V1 communication
8. SNMP V1 will not communicate when port number is changed from default port number even if the same port
number is configured at the NMS end.
48
– Monitoring T2S - ETH User Manual – v1.4
SNMP
Summary of Contents for T2S-ETH
Page 64: ...64 Monitoring T2S ETH User Manual v1 4 SNMP...
Page 96: ......
