manualshive.com logo in svg

CE+T Power T2S-ETH, User Manual

Share
Download
CE+T Power T2S-ETH User Manual Download Page 19

19 

– Monitoring T2S - ETH User Manual – v1.4

Hardware

6.4  Graphical User Interface - Catena

The Catena display can be used with the T2S ETH. Catena is either available in rack mount or door mount version.

6.4.1  Description

On front access, Catena has a wide 7’’ capacitive touch screen alongside 3 led following the same scheme as in T2S 
ETH and two connectors: USB type A and Ethernet (RJ45). A reset button is also provided. Catena firmware can be 
upgrade using the Micro SD card. Device firmware is available in 

my.cet-power.com

 

From the rear, there are two 12 VDC inputs that help Catena to be powered by two different sources, usually AC and 
DC. The PE is also available on power supply connector. Two Ethernet (RJ45) ports are available, one for connection to 
T2S ETH (see section 6.4.2, page 20) and one for permanent network connection.

Important remark: this is the latest version released of Catena. If you have different version of 
Catena, refer to the system user manual.

Summary of Contents for T2S-ETH

































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands