manualshive.com logo in svg

CE+T Power T2S-ETH, User Manual

Share
Download
CE+T Power T2S-ETH User Manual Download Page 29

29 

– Monitoring T2S - ETH User Manual – v1.4

Graphical User Interface

7.4.8  Connections

As described before, T2S ETH has 2 digital inputs and 3 alarm relays.

State of each of these connections can be read through the “connections” page.

An extra button “toggle” allows the user to test each relay manually, toggling it for a few seconds with the aim of 
detecting a mechanically failing device over the time.

7.4.9  Files

Three tabs are displayed in Files page.

Transfer tab

 gives user the opportunity 

to download log file and configuration 
file.

It’s also on that page that log file can be 
cleared when it’s becoming too large.

Update tab

 allows user to install the 

latest software version and get the 
latest features. Software is available 
through CE+T customer area in the 
website (my.cet-power.com).

Software are provided in a proprietary 
format called “*.saf” file. Once 
uploaded, the system will restart, 
installing the new application after 
verifications.

Dedicated procedure will be provided at 
the same location if needed. 

Summary of Contents for T2S-ETH

































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands