41
– Monitoring T2S - ETH User Manual – v1.4
Catena
8.5 Protocols
Using Catena SNMP V2C, SNMP V3 and Modbus TCP support is enhanced to monitor the system.
8.5.1 SNMP v2c
Implemented MIB file is CET-MIB.
For configuration refer to section “SNMP”, page 46.
8.5.2 SNMP v3
Implemented MIB file is CET-MIB. Three different modes are available in SNMP v3 with subsequent parameters:
•
No Auth/No Priv
•
Auth/No Priv
•
Auth/Priv
8.5.3 Modbus over TCP/IP
Only “read” mode is available, which means that Modbus can only be used for monitoring, not to execute actions on
the system.
Port is fixed to standard Modbus TCP/IP port 502. This protocol can be either enabled or disabled.
The Reserved parameters are not implemented in the current version of T2S ETH and are for future use.
Address
Description
Unit
Type
600
Serial number H
U16
601
Serial number L
U16
602
Application version
U16
603
Application revision
U16
604
Application built
U16
605
Reserved
606
Reserved
607
Reserved
608
Bootloader version
U16
609
Bootloader revision
U16
610
Bootloader built
U16
1002
Total AC output true power
W
S32
1004
Total AC output apparent power
VA
S32
1006
Worse phase load ratio
%
S32
1008
Reserved
1010
Total configured AC output true power
W
S32
1012
Total configured AC output apparent power
VA
S32
1014
Total available AC output true power
W
S32
Summary of Contents for T2S-ETH
Page 64: ...64 Monitoring T2S ETH User Manual v1 4 SNMP...
Page 96: ......
