CD Automation REVO C 2PH 690V, User Manual

Page: 45 / 81

REVO C
2PH from 60A to 800A - 690V
User’s manual
45
Parameter Name Description Default Range Unit
Modbus
Address
Par.
Type
Pb Power
Set the gain for the main loop. A larger
value yields a larger adjustment for a
given deviation
10% 0 to 255 % 26
Read
Write
Ti Power
Set how aggressively the integral part
of the control algorithm acts. A larger
settings yields a larger adjustment for
a given deviation over a given time
50 0 to 255 27
Read
Write
HB Sense
Set the threshold of resistance that
activates the Heater Break alarm. This
setting is in percentage of the nominal
load resistance
100% 0 to 100.0 % 29
Read
Write
HB Delay
Set a delay between when the
resistance drops below the value set
for a heater break sensitivity and when
the heater break alarm is indicated.
This set increments of 50mSec
50
(2,5 sec)
0 to 255
(0 to 12,75
sec)
28
Read
Write
Logging
Enable or disable data logging on the
internal SD card
0 139
Read
Write
Option Value
Off
0
On
1
DEFAULT:
Off 0
Parameter Name Description Default Range Unit
Modbus
Address
Par.
Type
Log Period
Set how often data is logged 5 sec 0 to 255 sec 70
Read
Write