CCI.Command
– Operation
37
Headland track 2: half width
In the third headland mode (see infobox headland mode chapter 0)
lead tracks
are
displayed in the headland area.
This function is useful if during working of the headland a half working width must
be used. For example this can be during sowing with a particular tramline rhythm.
If the option is activated, the distance between guidelines 0 and 1 is taken as a half
working width. The working of the second track in the headland mus then be
performed with the half working width.
4.3.4.5
Headland track 2: activate/deactivate half width
To activate/deactivate half width for track 2 in the headland proceed as follows:
1. Press on the "Headland track 2 half width" button on the
touchscreen
or turn
the scroll wheel until the button is highlighted in white and then press on the
scroll wheel.
Once the button is highlighted you can, alternatively, also press the "OK" (F6)
button.
2. Enter the
Boolean
value.
3. Confirm your entry with "OK".
Summary of Contents for CCI 50
