CC-ISOBUS CCI 50, Operating Instructions Manual

Page: 18 / 359

11
3 Set-up for operation
3.1 Mounting the terminal
The terminal is supplied with a device holder. The terminal is installed
in the tractor cabin using the device holder:
1. Assemble the device holder (Figures 1 and 2).
2. Mount the device holder on the frame and terminal (Figures 3 and
4).
3. Secure the terminal with the device holder in the tractor cab so
that it is in the driver’s field of view. (Figure 5 and 6).
Note
Ensure that the screws are tightened firmly.
Mount the terminal so that it
 Is easy to read and operate and
 Does not impede the view of the tractor controls or the outside
view.