CC-ISOBUS CCI 50, Operating Instructions Manual

Page: 283 / 359

CCI.Command
– Operation
40
4.3.4.6.1 Enter the Look ahead time
Under Look ahead , you specify what time interval for calculating of steering
suggestions is taken into consideration. The value should be matched to the actual
driving speed and the geometry of the lead track.
Proceed as follows to enter the Look ahead time:
1. Press on the "Look ahead" button on the touchscreen or turn the scroll wheel
until the button is highlighted in white and then press on the scroll wheel.
Once the button is highlighted you can, alternatively, also press the "OK" (F6)
button.
2. Enter the value on the touchscreen using the number pad or the slider.
3. Confirm your entry with "OK".
Note
Values between 1 and 10 are valid for the Look ahead time.
4.3.4.6.2 Enter the LED Distance value
You specify what deviation a segment of the lightbar represents.
To enter the value for the LED Distance , proceed as follows:
1. Press on the " LED Distance " button on the touchscreen or turn the scroll
wheel until the button is highlighted in white and then press on the scroll
wheel.
Once the button is highlighted you can, alternatively, also press the "OK" (F6)
button.
2. Enter the value on the touchscreen using the number pad or the slider.
3. Confirm your entry with "OK".
Note
Values between 10 and 100 cm are valid for the LED Distance .