CC-ISOBUS CCI 50, Operating Instructions Manual

Page: 344 / 359

CCI.GPS
– Set-up for operation
7
3.1.1.3 Compatible GPS receivers
The correct transfer of GPS messages to the terminal has been tested with the
following GPS receivers:
Manufacturer Model
Cabtronix SmartGPS5
geo-concept Geo-kombi 10 GSM
Hemisphere A100 / A101
John Deere StarFire 300
Novatel Smart MR10
Trimble AgGPS 162
Trimble AgGPS 262
Note
You can find detailed and current information about GPS receivers and settings at
http://www.cc-isobus.com/produkte/gps.
Note
The CCI.Apps place different demands on the quality and accuracy of the GPS
messages. For navigation (FieldNav) and documentation (CCI.Control) simple data
records are sufficient, as provided by inexpensive receivers. For lane guidance and
section control (CCI.Command), receivers with Egnos correction and accuracies of
20 to 30 cm are required. From this, different minimum requirements result for the
NMEA data records from the receiver. Determine the precise requirement from the
respective apps operating instructions.