CC-ISOBUS CCI 50, Operating Instructions Manual

Page: 249 / 359

CCI.Command
– Introduction
6
1.3.3 CCI.Command/Headland Mode
This module makes it possible to firstly work the inner field and then the headland
to conclude. Additionally if offers a virtual headland function. There are two options
for creating the headland. Together with a field boundary it is possible to plot a
headland area within a width defined by the driver around the field. Likewise it is
possible to plot a headland area without a field boundary. Upon reaching these
areas, the implement sections are automatically switched off. For the final working
of the headland, the virtual headland is simply deactivated.
This functionality is primarily used with planting devices and seed drill implements,
but also when using certain crop protection products there are advantages through
final working of the headland. In this way travel through the freshly worked crop
when turning on the headland is avoided.