CC-ISOBUS CCI 50, Operating Instructions Manual

Page: 307 / 359

CCI.Command
– Operation
64
Headland mode
CCI.Command recognises three different headland modes:
Mode 1, headland locked:
The headland is plotted in light grey, the sections are automatically switched off in
this area.
The inner field can be worked.
Mode 2, headland free:
The light grey area is not displayed.
The headland is available for working, the sections are not switched off here.
Mode 3: Headland with lead tracks:
Lead tracks are displayed in the
headland. The reference for these lead tracks is the field boundary.
The headland can be worked.
4.4.2 Selecting headland mode
To switch between headland modes, proceed as follows:
1. Press the "Change headland mode" button (F9) on the touchscreen .
→ The headland mode changes.