CBX SOLUTION 2-FIX, User Manual

Page: 15 / 52

14
13
12
5
7
10
11
5
1
9
6
12
REMOVAL OF THE CBX SOLUTION 2-FIX
Perform the installation steps in the reverse order.
NOTE! By folding in the locking arms (5) , you are not just protecting the vehicle
seat but also the locking arms of the ISOFIX Connect system from dirt and
damage.
• Unlock the ISOFIX locking arms (5) on both sides by pushing the
release buttons (10) and pulling them back simultaneously.
• Pull the seat out of the ISOFIX guides (7) .
• Rotate the locking arms (5) 180°.
• Operate the adjustment lever (9) on the frame (1) of the CBX SOLUTION
2-FIX and push the locking arms in as far as they will go.
ADAPTING TO BODY SIZE
• The seat can be adjusted to your child’s body simply by using the adjustable
headrest (12) . To do this, pull the adjustment level (13) upwards to unlock the
headrest (12) .
• Adjust it so that there is space for two fingers (ca. 2 cm) between the lower
edge of the headrest (12) and the shoulder of the child.
WARNING!
Never leave your child unattended in the car. The plastic
parts in the child restraint system heat up in sun and the child may sustain
burns. Protect your child and the car seat from direct sun exposure (e.g. by
covering it with a light colored cloth).
!
NOTE! Only an optimally adjusted headrest (12) can offer your child maximum
protection and comfort while ensuring that the diagonal belt can be fitted smooth -
ly (6) .
The height of the CBX SOLUTION 2-FIX can be adjusted to one of 7 positions.
max.