Page 24 of 40
9.0 Procedure for changing inserts in the infeed
guide
10.0 Procedure for re-positioning the measuring
system fixed roller
(It will be necessary to adjust the position of the roller. This roller provides support for
the measuring wheel. It should be positioned so that the measuring wheel does not
deflect the cable.
Loosen and remove the (2) m3 screws
securing the upper housing onto the lower
housing
Loosen and remove the m2.5 screw securing
the insert into the upper housing
Remove the insert
Repeat the procedure for the insert in the
lower housing
To fit the new inserts, reverse the
disassembly procedure
Loosen the m4 screw holding the roller support
bracket in position
Position the bracket so that the roller is in light
contact with the new cable. Tighten the screw.
