Page 15 of 40
The amount of pressure on the cable can be varied simply by loosening the thumb nut,
moving the clamp arm lever to the right or left; as required, and tightening the
thumbscrew.
As more experience is gained using the machine, the amount of compression required
will become clear.
Note:
An alternative method of setting the compression force is detailed in the note at the end
of Appendix 2.
Connect the air supply to the machine.
The air inlet to the machine is
male fitting for a quick release
coupling.
The air inlet to the machine
must terminate in a suitable
connector.
Connect the electrical supply to the machine.
The electrical supply must terminate in an
RS type 3 way cable connector fitted with
sockets. Adaptors are available to suit any
required existing connector, speak to our
sales department for full details and
specification of connector.
If the power supply lead supplied with the
Breeze
Cable
Blowing
Machine
is
unsuitable and requires to be changed
refer to the safety instructions for further
details.
NOTE: DO NOT PRESS RST ON THE COUNTER WHILE
POWERING UP THE MACHINE.
IT IS THE RESPONSIBILITY OF THE USER TO ENSURE THAT THE
CONNECTIONS MEETS THE ELECTRICAL REGULATIONS FOR THE RELEVANT
COUNTRY.
