manualshive.com logo in svg

Cavium FastLinQ 3400 Series, User Manual

The Cavium FastLinQ 3400 Series is a high-performance networking solution designed to meet the demanding needs of modern data centers. With its advanced features and industry-leading performance, this product ensures seamless connectivity and optimized network performance. Unlock the full potential of your device by accessing the detailed User Manual, available for free download at manualshive.com.

Share
Download
background image

User’s Guide—Converged Network Adapters and Intelligent Ethernet Adapters 
FastLinQ 3400 and 8400 Series

ix

83840-546-00  N

qs_per_cos . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

41

cos_min_rate  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

41

bnx2i Driver Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

42

error_mask1 and error_mask2 . . . . . . . . . . . . . . . . . . . . . . . . . .

42

en_tcp_dack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

42

time_stamps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

42

sq_size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

43

rq_size  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

43

event_coal_div . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

43

last_active_tcp_port . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

43

event_coal_min  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

43

event_coal_div . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

44

tcp_buf_size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

44

debug_logging  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

44

bnx2i_ssan_feature  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

44

ooo_enable. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

45

bnx2fc Driver Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

45

bnx2fc_debug_logging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

45

cnic Driver Parameters  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

45

cnic_debug . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

45

cnic_dump_kwqe_enable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

46

Driver Defaults . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

46

bnx2x Driver Defaults  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

46

Teaming with Channel Bonding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

46

Statistics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

47

7

VMware Driver Software

VMware Drivers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

48

Packaging. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

49

Download, Install, and Update Drivers . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

49

Driver Parameters  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

53

bnx2x Driver Parameters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

53

int_mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

53

disable_tpa . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

53

dropless_fc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

54

multi_rx_filters  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

54

num_rx_queues . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

54

num_tx_queues  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

54

pri_map. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

54

qs_per_cos . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

55

Summary of Contents for FastLinQ 3400 Series

























































































































































































































































































































































Reviews:

No comments

Related manuals for FastLinQ 3400 Series

ABB FBIP-21 BACnet/IP Quick Installation And Start-Up Manual preview
FBIP-21 BACnet/IP
Brand: ABB Pages: 2
Ampetronic ATT100-T70 Manual preview
ATT100-T70
Brand: Ampetronic Pages: 2
Adaptec APA-9310 Installation And Reference Manual preview
APA-9310
Brand: Adaptec Pages: 6
I-Gard DSP-CA Instruction Manual preview
DSP-CA
Brand: I-Gard Pages: 9
Mini Gadgets BB2Outlet User Manual preview
BB2Outlet
Brand: Mini Gadgets Pages: 12
Agilent Technologies K281C Operating And Service Manual preview
K281C
Brand: Agilent Technologies Pages: 32
TB Wood's Dura-Flex Coupling Installation Instructions preview
Dura-Flex Coupling
Brand: TB Wood's Pages: 4
M-Systems Flash Disk Pioneers DiskOnChip 9x12 BGA-to-32-Pin DIP Adapter User Manual preview
DiskOnChip 9x12 BGA-to-32-Pin DIP Adapter
Brand: M-Systems Flash Disk Pioneers Pages: 6
Dense Adapt Reference User Manual preview
Adapt Reference
Brand: Dense Pages: 9
M-system LiBo-8 Instruction Manual preview
LiBo-8
Brand: M-system Pages: 7
Zonet ZEW2508A Product Data preview
ZEW2508A
Brand: Zonet Pages: 2
B.E.G. LUXOMAT 93067 Quick Start Manual preview
LUXOMAT 93067
Brand: B.E.G. Pages: 4
Conceptronic CBT40NANO Multi Language Quick Manual preview
CBT40NANO
Brand: Conceptronic Pages: 11
Hamlet XUPP25 User Manual preview
XUPP25
Brand: Hamlet Pages: 5
oticon ConnectLine Phone Adapter 2.0 Instructions For Use Manual preview
ConnectLine Phone Adapter 2.0
Brand: oticon Pages: 26
Jabra Link 950 USB-A Quick Start Manual preview
Link 950 USB-A
Brand: Jabra Pages: 2
Epson WorkForce 600 Series User Manual preview
WorkForce 600 Series
Brand: Epson Pages: 135
StarTech.com DK30C2HAGPD Quick Start Manual preview
DK30C2HAGPD
Brand: StarTech.com Pages: 2

Brands by name

Popular brands

Load more brands