Cavium FastLinQ 3400 Series, User Manual

Page: 156 / 344

9–Configuring iSCSI Protocol
iSCSI Offload in Windows Server
126 83840-546-00 N
50 Error
Target failed to respond in time to a Text Command sent
to renegotiate iSCSI parameters.
51 Error
Target failed to respond in time to a logout request
sent in response to an asynchronous message from the
target.
52 Error
Initiator Service failed to respond in time to a request
to configure IPSec resources for an iSCSI connection.
53 Error
Initiator Service failed to respond in time to a request
to release IPSec resources allocated for an iSCSI con
-
nection.
54 Error
Initiator Service failed to respond in time to a request
to encrypt or decrypt data.
55 Error
Initiator failed to allocate resources to send data to
target.
56 Error
Initiator could not map an user virtual address to ker
-
nel virtual address resulting in I/O failure.
57 Error
Initiator could not allocate required resources for pro
-
cessing a request resulting in I/O failure.
58 Error
Initiator could not allocate a tag for processing a
request resulting in I/O failure.
59 Error
Target dropped the connection before the initiator could
transition to Full Feature Phase.
60 Error
Target sent data in SCSI Response PDU instead of Data_IN
PDU. Only Sense Data can be sent in SCSI Response.
61 Error
Target set DataPduInOrder to NO when initiator requested
YES. Login will be failed.
62 Error
Target set DataSequenceInOrder to NO when initiator
requested YES. Login will be failed.
63 Error
Cannot reset the target or LUN. Will attempt session
recovery.
64 Information
Attempt to bootstrap Windows using iSCSI NIC Boot (iBF).
65 Error
Booting from iSCSI, but could not set any NIC in Paging
Path.
Table 9-5. Offload iSCSI (OIS) Driver Event Log Messages (Continued)
Message
Number
Severity Message