manualshive.com logo in svg

Cavity Sliders Solic CS005, Operation Manual

Share
Download
Cavity Sliders Solic CS005 Operation Manual Download Page 14

 

 

14 

7.

 

HYPOID GEAR MOTOR SH-17H 

 
Motor SH-17H 

 

1.

 

D connector (8 pin male plug) 

Lead the wire of D connector to the 8-pin female connector of the microcomputer 
control box CS005 
 
2.

 

F connector (4 pin male plug) 

The connector is for optional motor lock - LK01. Lead the wire of the lock to the F 
connector to the 4-pin female connector of the microcomputer control box CS005. 

The door automatically locks when the door is in fully closed position. The lock is 
unlocked and the door opens and closes when the activate switch is turned ON. 

 
3.

 

Motor Mounts 

Aluminium casting with rubber inserts fits the motor to the track and allows easy 
removal of the motor for maintenance. 
Motor removal: 

once belt is removed from motor pulley.

 

 - Disconnect motor and lock connectors from controller. 
 - Slide motor in direction away from pulley 
 - Lift pulley end out of motor mount towards you. 
 - Pull rear flange out of motor mount and remove. 
 - Follow steps in reverse to remount motor.  

 

 

 

 

 

D

F

D

F

D

F

D

F

Summary of Contents for Solic CS005

















Reviews:

No comments

Brands by name

Popular brands

Load more brands