10
Version 17
Safe-E-
Stop™
User Guide
Unlinked PSDs should not be visible to personnel in the area and potentially confused for an available E-Stop
switch.
If PSDs in chargers are unlinked,
they should not be visible. The easiest way to do this is to place the
charger within a secondary enclosure or position it so that the E-Stop switch faces toward a wall and away from
personnel.
Failure to comply with the above may result in no immediate available protection being provided to stop your
machine, which in turn could result in loss of ability to stop an impending emergency situation and may lead to
injury or death.
2.5 No serviceable parts
WARNING
There are no user serviceable parts in this PSD / MSD system; please return damaged units to Cattron or a
Cattron authorized service center for service and do not attempt to repair these units.
Unauthorized repairs will void the unit’s safety rating and could compromise the unit’s ability to stop your
machine, which in turn could result in loss of ability to stop an impending emergency situation and may lead to
injury or death.
2.6 Regulatory Compliance
WARNING
Observe the statutory regulations and directives applicable for the intended purpose, e.g.:
▪
Accident prevention regulations
▪
Safety rules and directives
▪
Standards
▪
Generally applicable statutory and other binding regulations for accident prevention and environmental
protection, and general safety and health requirements.
2.7 Awareness of PSD range and Hazards around the machine
WARNING
The operators and the personnel in general should be trained to know the operational range limits of the PSD
and the surrounding hazards.
