11
Version 17
Safe-E-
Stop™
User Guide
2.8 The system may cause an unexpected stop of the machine
WARNING
The design of the machine shall consider the risk associated with an unexpected stop of the machine.
2.9 The safety analysis shall consider the reaction time of the system
WARNING
The safety analysis of the application shall consider the reaction time of the system.
2.10 Ethernet may not be used for safety-critical function
WARNING
Ethernet data must only be used for informational purposes. The functionality of the green PSD button that is
available in the Ethernet data should not be used for any safety-critical functionality such as restarting the
machine.
2.11 Frequency Change
WARNING
Selection of the correct operating frequency is entirely the responsibility of the user and Cattron accepts no
responsibility for incorrect frequency selection and configuration.
The frequency selected must strictly conform to channel setting rules shown in section 4 of this manual or the
system may not function correctly.
For licensed frequencies the channel set must also have a valid FCC, IC, or other license, or the user may be
subject to Federal license infringement fines.
Verify correct system operation prior to putting the system into use.
2.12 Master Address Usage
WARNING
Users should ensure that when a system includes one or more spare MSDs, that only one is powered on at a
time or the system will not operate without errors.
All users must ensure that only one Master Address is used in one location, i.e. do not use one MSD and some
associated PSDs in one location and a spare MSD, plus other associated PSDs in another location.
Authorized users must ensure the above is adhered to by associating only one Master Address per user
location.
Verify correct system operation prior to putting the system into use.
2.13 General Safety Information
▪
Persons under the influence of drugs, alcohol and/or other medicine that impairs reaction may not install,
repair, or operate this product.
