www.catgenie.com
1-888-735-3927
15
1. Enter Settings Menu:
Press and hold both the Start and Auto Button for 3 seconds until
the CatGenie verbally says
"Entering Settings Menu."
In Settings Menu, Auto Button dims in
and out.
2. Once in the Settings Menu,
click the Auto Button to move through the options below.
To adjust the desired setting, press the Start Button. You can exit the Settings Menu at any time
by pressing and holding both the Start and Auto Buttons for 3 seconds .The CatGenie will tell
you that it is Exiting the Settings Menu.
SETTINGS MENU OPTIONS
Wi-Fi Settings
This setting allows you to connect your CatGenie A.I. to the CatGenie App (You can see more
about the App on page 13) Once the CatGenie A.I. is connected, you can use this setting to
disconnect the CatGenie from Wi-Fi or change the network.
Panel Settings
This setting allows you to lock the Control Panel.
TO LOCK:
While in Panel Settings, press the Start button to lock the panel.
TO UNLOCK:
Double tap any button on your Control Panel. You do not need to access the
Settings Menu to unlock.
Volume
This setting allows you to change the volume levels of your unit. The CatGenie will “Meow” in
different sound levels to indicate the volume.
Restore CatGenie Factory Settings
This option allows you to restore all changes made to your CatGenie. It will restore the
CatGenie volume and cat sensors to the CatGenie factory default.
Cat Sensor
This setting allows you to adjust the sensitivity of your cat sensor to better fit your home
environment. The CatGenie Cat Sensor comes pre-adjusted to function correctly in the majority
of homes, but if you have issues with CatGenie not detecting your cat, you can adjust the
sensitivity. Your CatGenie may need to be re-adjusted if you are using any accessories on the
CatGenie (GenieDome or Door). The sensor has 7 levels of sensitivity. To change your Cat
Sensor levels, press the Start Button in the Cat Sensor Menu.
Testing Menu
See more information about the CatGenie Testing Menu on page 16.
Exit And Run a Finishing Cycle
This option allows you to exit and run a Finishing Cycle.
Always run a finishing cycle after
clearing an alert or disassembling CatGenie.
Exit
Allows you to exit the menu.
CATGENIE SETTINGS MENU
