ENGLISH June 2021 IND B
Page
31
of
156
CATANA SAS - Zone Technique du Port - 66140 CANET EN ROUSSILLON (FRANCE)
e - mail : [email protected] - Tel 33 (0)4 68 80 13 13 - Fax 33 (0)4 68 80 13 19
WARNING
The bilge pump system is not intended to control ingress of water in the event of a hull breach. It is
designed to eject water originating from spray, leaking seacocks or any other moderate leak .
SAFETY PRECAUTIONS
- Ensure that the bilge pumps are in working order before putting to sea.
- Regularly clean the sump and bilge pump strainers from any debris which could obstruct the pumps.
- If the watertight bulkheads separating the forward and aft spaces are equipped with scupper valves,
these must be kept shut under normal circumstances, and only opened to empty water in the main
bilge.
- Make sure you know where to find the manual bilge pump and its handle.
- Make sure you know where to find the switch for the electric bilge pump on the electrical panel
- Check that the seacocks are in the open position.
Electric bilge pump below passageway
floor.
