ENGLISH June 2021 IND B
Page
22
of
156
CATANA SAS - Zone Technique du Port - 66140 CANET EN ROUSSILLON (FRANCE)
e - mail : [email protected] - Tel 33 (0)4 68 80 13 13 - Fax 33 (0)4 68 80 13 19
3.6 AC Installation (220/110 Volts - ISO 13297)
DANGER
The on-board AC installation is protected by a circuit breaker and is equipped with an RCD (residual
current device). The wiring for any additional on-board AC accessories must be done by a
professional, with new, appropriately sized circuit breakers.
If maintenance is being carried out with the boat out of the water, switch it to the ‘’ON’’ position to ensure
earthing protection
via the shore power.
Location of the AC shore power circuit breaker: Starboard engine compartment.
If the vessel is equipped with a generator, an RCD will be installed near to it. The same applies if the vessel
is fitted with a DC/AC inverter.
The circuit breakers for the various AC circuits are housed in electrical boxes near the chart table.
Combined inverter/charger unit + fuse
Electrical panel located in starboard forecabin
