ENGLISH June 2021 IND B
Page
18
of
156
CATANA SAS - Zone Technique du Port - 66140 CANET EN ROUSSILLON (FRANCE)
e - mail : [email protected] - Tel 33 (0)4 68 80 13 13 - Fax 33 (0)4 68 80 13 19
3.4 Windlass and electric winch
CAUTION
-
When using the windlass or electric winch it is essential that the engine is running and is at a
slightly increased speed.
-
Always switch off the feed at the electrical panel when these are not in use
Switching on the power to the windlass or electric winches is done at the electrical panel.
The windlass is operated via the corded remote control located beneath the chain locker lid or from the helm
station (option).
The fuses and the relay for the windlass are located beneath the chart table (Figure 3).
Figure 3