CAST Information Co., Ltd. CDVR-0404R Operation Manual Download Page 45

Page: 45 / 59

Playback Button Functions

Button Function

•

Decrease playback speed.

•

Increase playback speed.

•

Turn On/Off audio recording during normal speed playback.

•

Copy a video clip or image.(Can be performed only by the Administrator.)

•

1x Playback in forward/reverse direction.

•

Fast reverse playback ( 2x

→

16x

→

32x)(Only I Pictures.)

•

Fast forward playback ( 2x

→

16x

→

32x)

•

Pause video during playback.

•

Paused video will resume playback at the speed it was being played if the

button is re-clicked.

•

Frame by frame forward playback.

•

Frame by frame reverse playback.(Only I Pictures.)

•

Slow playback( 1/2x

→

1/4x

→

1/8x

→

1/16x )

Time Search & Playback Information

•

Channel, Date, and Time Information of the video clip being played will be displayed in this window.

•

A new Date and Time can be entered directly in the field to perform search.

Click on the Channel, Date, or Time field and turn the mouse wheel to change the time.

The video will be put on pause mode when clicking on the input fields. Click any of the

playback buttons to start playback.
When using the remote controller, use the Up/Down buttons to change the time.

Operation

2007

12 : 10 : 00

Summary of Contents for CDVR-0404R




























































Search results

Summary of Contents for CDVR-0404R

Reviews:

Related manuals for CDVR-0404R

Brands by name

Popular brands

CAST Information Co., Ltd. CDVR-0404R, Operation Manual

Search results

Summary of Contents for CDVR-0404R

Reviews:

Related manuals for CDVR-0404R

Brands by name

Popular brands