manualshive.com logo in svg

CAST Information Co., Ltd. CDVR-0404R, Operation Manual, Page: 42 / 59

Share
Download
CAST Information Co., Ltd. CDVR-0404R Operation Manual Download Page 42

42 

 
 

 

3

.      

 

  Recording On/Off 

 

Start Recording when not in recording mode or Stop Recording during record mode. Recording will be 
performed based on the settings applied in [SETUP]. 

※

 

Authorized user password entry will be required in order to stop recording. 

Click the RECORD        button to Start/Stop recording. 

 

     

 

4

.

        

Alarm & Network Status 

Status of Alarm, Network Connection, Recording are displayed on the Status Bar. 

 
 
 
 

 

•             

When a Sensor is triggered the corresponding Alarm Output will be highlighted in pink..  

•           

 When a Network connection occurs, the icon will be highlighted in pink. 

※

 

The Status Bar will pop-up automatically when a Sensor is triggered or Network connection occurs. 

※

 

The Status Bar can be cleared by clicking the      button. 

       

5

.

        

GUI(Graphic User Interface) Transparency Adjustment 

The transparency of the GUI(Graphic User Interface) and OSD(On Screen Display) can be 
Adjusted. 

        Click        and use the           buttons to adjust the transparency. 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Operation

Summary of Contents for CDVR-0404R




























































Reviews:

No comments