23
CATEGORY
DEFAULT
VALUE
FUNCTION & OPERATION METHOD
COLOR SETTING
•
Set the Brightness, Contrast , Hue level of the selected camera
•
Input Range : 0~10
Use the pop-up Key Panel or turn the mouse wheel to change
the level and click on or button.
PTZ SETTING
•
Assign the PTZ ID, Driver, Baud Rate, Data Bit, Parity, Stop Bit
for the selected PTZ Camera
•
Input Range :
- PTZ ID : 0~255
- PTZ Protocol : PELCO-D, PELCO-P, PANASONIC, MeritLilin. and.
others.
- Baud Rate : 300 ~115,200
- Data Bit : 7
⇔
8
- Parity : NONE
⇔
ODD
⇔
EVEN,
- Stop Bit : 1
⇔
2
Use the pop-up Key Panel or turn the mouse wheel to change
the input values.
Click to test whether the PTZ camera is operating
properly after setting the parameters. If the PTZ is connected
correctly, the camera will move to the left every time the button
is clicked
Click to save the new setting or to
cancel the new setting.
SERIAL SETTING
•
Assign the Driver, Baud Rate, Data Bit, Parity, Stop Bit for the
selected Controller
Use the pop-up Key Panel or turn the mouse wheel to change
the input values.
Click to save the new setting or to
cancel the new setting.
•
The selected category will return to its previous value.
Click .
•
All settings in the Camera Setup screen will return to its previous
values.
Click .
Configuration
