Non contractual document - Cassese France
®
- Document non contractuel
- 9 -
Advised way of fitting :
Male Connector
on Machine
Quick release (Q/R)
Female Air Connector
AIR SOURCE
(compressor)
Q/R US
male
connector
Standard
hose
connector
USA
STANDARD
Z675
Z749
Z701
Z675
Z749
Z556
2.B. AIR LINE FITTINGS
2.C. CONNECTING TO THE AIR SOURCE
The MACH 1 UNI must be connected to the air source located on the front panel of the drawer, at
the level of air connector with an air line fitting presented above.
Make sure that the air pressure on the air pressure gauge is set to 6 bars (85 p.s.i.).
If the indicated pressure is not 6 bars (85 p.s.i.) :
-Check the pressure at the air source. If pressure is correct at the air source, perform this following
procedure :
Pull up the air pressure regulator knob and
turn it (clockwise = more pressure) until the
needle of the air pressure gauge reaches 6
bars (85p.s.i.).
Unscrew the both screws of the panel of the
drawer (as shown in image) with a 3mm Allen
key. Then open the drawer to have access to
the air pressure regulator knob.
Summary of Contents for MACH 1 UNI
