III - SETTING UP THE MACHINE
There must be sufficient clearance around the machine to allow free
movement and access for maintenance (see page C).
The CS 960 must be installed on a stable, flat floor capable of
supporting its weight (950 kg). Before making any electrical and
pneumatic connections, level the machine by means of the adjustable
feet.
Use a 24-mm open-end spanner on lock nut CE and a 12-mm open-
end spanner for base B. Tighten lock nut CE firmly after adjustment
and levelling.
As the work surface is 900 mm from the floor it may be necessary to
have a platform available for operator of short stature.
B
CE
Assembling the left and right tables
Open the main case by fully
loosening safety screw VS
and releasing left and right
spring clips SG / SD.
SG
SD
VS
Remove screws A, B and C, D (on the right and left sides of the
machine frame) and screws E, F of the cylindrical suppports (on
the extension support brackets) with a 5-mm Allen key.
A B
C D
E F
The cutting table has 2 series of 3 screws and 2 rule supports R, which secure the right and left stops BD and
BG.
BG
BD
BMI
BMI
BD
BG
R
R
V
V
4
1 2 3
3 2 1
Summary of Contents for CS 960
Page 4: ...C...
