This machine is packed in a crate containing:
· 1 right table extension with Slot base measuring Fixed stop
· 1 left table extension
· 1 box containing:
- 1 Allen key, 10 mm (blade removal) - 1 Allen key, 4 mm (table assembly)
- 1 Allen key, 2,5 mm + 1 Allen key, 5 mm + 1 Allen key, 6 mm
- 1 quick-fit connector (fitted on machine) / 1 barbed connector / 1 USA connector / 1
quick-fit coupling (see page 6) / 1 blade steadying handle
II - UNPACKING AND HANDLING
Using a screwdriver, open the crate fasteners then remove the lid and 4 sides.
Leaving the protection in place
, remove :
1) the accessories box, the left and right blade carriage
arms and the left table extension located below the ma-
chine,
2) the right table extension located behind the machine.
Leave the pedal in place on the cutting table as it is wired
to the cabinet.
Using a cross-head screwdriver, remove the blocks from
the 4 feet of the machine.
For handling, a lift truck with forks at least 115 cm long must be used. The forks must be
positioned correctly below the frame: See below. Gross weight of the machine: 950 kg
BLOCK
2
Summary of Contents for CS 960
Page 4: ...C...
