Cassese CS 960, Instructions For Use Manual

Page: 6 / 17

I- INTRODUCTION
The CS 960 saw is used to produce 45° mitre cuts on all mouldings made
from solid or reconstituted wood, with or without coating (paint, varnish,
plastic, paper, metal leaf such as gold, bronze, aluminium, etc.).
It cannot be used for:
· Moulding profiles that do not have a 90° heel at least 5 mm high,
· Any metal profiles,
· Thin extruded plastic profiles:
(plastic cords, trimming, etc.).
Its two circular blades are driven by two electric motors
.
The moulding is clamped automatically by vertical (option) and horizontal
(standard) pneumatic cylinders.
A control, actuating the release of the blade carriage ensures operator safety
by keeping hands out of range of the blades.
The electrical control equipment is installed in a cabinet at the front of the
machine.
The pneumatic equipment is installed in the base and on the right-hand side
of the machine.
This machine was built to meet safety and hygiene requirements. It is
forbidden to modify the electrical and pneumatic equipment,
remove
protective equipment installed on delivery or modify the machine safety
devices
.
Saw CS 960 cannot be used by more than one operator at a time.
1
Residual Risks
Hands must never be inserted inside the main case as this contains the
clamping cylinders and rotating saw blades in their rest position.
For any other work inside the machine:
See the
«
Maintenance» section of this manual (page 11).