CASO DESIGN VacuChef 70, Instruction Manual

Page: 38 / 122

38

The electrical outlet must be protected by a 16A safety cut-out switch.

The electrical safety of the unit is only guaranteed if it is connected to a properly
installed protective conductor system. If in doubt, consult a qualified electrician. The
manufacturer cannot be made responsible for damages due to a missing or damaged
protective conductor.
15.7.1 Extension cords
If an extension cord is used:
► The electrical rating of the extension cord should be at least as great as the electrical
rating of the unit.
► The cord should be arranged so that it does not drape over a countertop or tabletop
where it can be pulled on by children or tripped over.
16 Complete Overview
This chapter provides you with an overview of your vacuum sealer and explains some of
its key features.
16.1 Overview
1 Vacuum Gauge: Shows the vacuum level inside the chamber.
2 Sealing bar: Contains a heating wire covered with Teflon which allows the bag to seal
but not to stick to the strip.
3 Gasket 4 Vacuum chamber: Plage the bag into the chamber
5 Sealing strip: Presses the bag against the sealing bar.
6 Fixation: Fix the bag during vacuum and sealing. Lift and clamp down to fix the bag.
7 On/Off power switch
Warning
The sealing bar gets very hot.
Please observe the following safety notice in order not to burn yourself or others.
► To avoid getting burned, never touch the sealing bar directly after sealing process.