MERIDIAN SERIES
®
HEA
TED ROLL-THROUGHS
Project __________________________
Item____________________________
Quantity _________________________
CSI Section 11400
MERIDIAN SERIES
®
Heated Roll-Throughs
980 S. Isabella Road
Mt. Pleasant, MI 48858
www.delfield.com
Phone: 800-733-8948
Fax: 800-669-0619
Email: [email protected]
Approval _________________
Date____________________
MHRT2-G
SPECIFICATIONS
Exterior: Cabinet front and shroud shall be 22-gauge
stainless steel. Exterior sides shall be aluminum. Facing
of shroud shall be easily removable without the use
of tools.
Cabinet interior shall be anodized aluminum. Bottom
& top of liner shall be die-stamped to provide
radius corners and a recessed bottom. Base shall be
fully insulated with high-density foamed in place
polyurethane.
Doors:
Solid doors shall have a 22-gauge stainless
steel exterior & anodized aluminum interior liner.
Doors shall be fully insulated with high density foamed
in place polyurethane. Each door shall have two
self-closing, cam-lift style hinges. Doors shall be easily
removable without use of tools. Door gaskets shall be
magnetic snap-in style to allow simple replacement.
Door handles shall be recessed.
Glass Doors - Unit is provided with hinged glass front
door(s). Glass doors are constructed with a combination of
extruded aluminum & PVC, and are provided with magnetic
gaskets. Doors will have
self-closing hinges and continuous
handle along vertical dimension of door(s).
• Please specify right or left hand hinging at time of order.
Mechanical controls shall be located behind a removable
shroud facing.
Dual Voltage Models Only:
Electrical connections shall
be 115/280-240 volt, 60 hertz, single phase, and must be
hard-wired to the junction box located on top of the unit.
Heating Assembly:
Cabinets to be designed to maintain
temperature up to 200ºF. Fin strip heating elements. High
speed blower to provide uniform airflow in cabinet 3ºF
variability. Removable/replaceable heating system. No
exposed elements inside cabinet. Fan and heating
elements service accessible without tools. Temperature
to be controlled by an adjustable electronic thermostat.
Night switch in front.
Notes
: Bottom to be reinforced with 14-gauge
channels. All units to be supplied with easily attachable
16-gauge stainless steel ramps, one per door opening.
Wiper gasket shall be provided on bottom of door for
seal to ramp.
MODELS:
MHRT1-S
Single section
MHRT2-S
Two section
Solid full height door
Solid full height doors
MHRT1-GS
Single section
MHRT2-GS
Two section
Solid full height door (one side)
Solid full height door (one side)
Glass full height door (one side)
Glass full height door (one side)
STANDARD FEATURES
• Built in door locks
• Durable stainless steel doors and shroud, for lasting
good looks
• New high-density foam insulation cuts energy costs
• Big, easy grip handles are easy to find, don’t intrude
into kitchen traffic
• Attractive aluminum side panels are easy to clean and
corrosion resistant
• Heavy-duty hinges with stay open feature
• Heating system is located outside the food zone, more
space for product storage
• Easy to read dial thermometer
• Tri seal door gaskets lower energy costs with a unique
insulating design
• Aluminum interior stands up to food acids without
corroding
• Lots of interior storage space for the money
OPTIONS AND ACCESSORIES
Stainless steel exterior sides
Stainless steel interior
Door and end laminate
Digital thermometer
220/50/1 electrical
